ZEOS Meridian 400 User's Guide download pdf (Page 46)

Chapter 4 - How to Use Your Meridian 800

PS/2 Style Mouse

Before you can use an external mouse, you must first install its

device driver. This software enables your mouse to

communicate with the system. See your mouse documentation

for instructions how to install the mouse and mouse driver.

Your system automatically switches to a PS/2 mouse if one is

connected to the PS/2 Mouse port. You cannot use both the

embedded pointing device and the external mouse at the same

time.

Note: A PS/2 style mouse may not work correctly if you connect it after bootup. Always

turn the power off before connecting a PS/2 style mouse.

Serial Mouse

Before you can use any external mouse, you must first install its

device driver. This software enables your mouse to

communicate with the system. See your mouse documentation

to learn how to install the mouse and mouse driver.

To use a serial mouse, first disable the TruePoint pointing

device in SETUP. On the SETUP menu (Ctrl-Alt-S at the DOS

prompt) Set Pointing Device to “Disabled.”

After the TruePoint device is disabled, connect a serial mouse

to the serial port at the back of the system unit. Do not try to

connect a PS/2 style mouse to the serial port. The mouse will

use the COM1 serial port.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 79 80

No comments

ZEOS Meridian 400 User's Guide Page 46