ZEOS Meridian 400 User's Guide download pdf (Page 61)

Chapter 5 - Using SETUP

Ring on Resume

Use the Ring on Resume feature to determine whether the

system automatically wakes up from Suspend mode upon

receiving an incoming modem ring from a serial modem or a

PCMCIA modem.

Low Battery Suspend

Use this feature to automatically enter the suspend mode when

the battery charge is critically low. If you disable this feature,

normal battery low alarms will occur, but the system will not

enter suspend mode unless you push the suspend/resume button.

You can choose Enabled or Disabled.

Note: If you disable this feature and ignore low battery alarms, the system will shut

down when the battery is drained. Also remember that Suspend mode is

intended for short breaks only. For longer breaks, always turn your machine

completely off, so the battery can recharge.

HDD Timeout Value

Use the HDD Timeout Value feature to determine how much

time elapses before the hard drive automatically shuts off. The

next time an application accesses the hard disk, it switches back

on.

The hard disk timeout interval can be disabled or set to preset

values between 1 minute and 15 minutes.

Remaining Battery Level

Displays the level of usable battery with the horizontal bar when

the battery pack is installed in your system.

Note: A battery must fully charge within the system, or the remaining battery level may

not read accurately as battery power decreases.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 79 80

No comments

ZEOS Meridian 400 User's Guide Page 61